The conveyors consist of standard
parts, which are advanced and simple in structure, easy to maintain.
Our vibrating equipment is adaptable for stationary and mobile crushing
plants. They are widely used in mining, metallurgical and coal industry
to transfer sandy or lump material, or packaged material. According
to different transferring equipment, the transfer system can be
one independently or multi-conveyors or combined with other transfer
equipments. The belt conveyor can be installed horizontally or aslope
to meet the needs of different transfer lines.
The belt conveyors produced by SJLC can be operated in the circumstance
temperature range from -20₿to +40₿ The temperature of transferred
material by this belt conveyor should be lower than 50₿
The types of the belt conveyors produced by SJLC are as follows:
1. Devided by Driving Method:
a. STD—Mechanical Drive
It's driven by cycloidal pinwheel reducer (with outdoor motor )
and chain-drive mechanism.
b. STDJ Mechanical Drive Series .
It adopts upside-down reducer and belt-drive mechanize.
c. STD-Electric Rotor Drive Series
It's driven by electric rotor.
2. Divided by Installation Methods
a. Fixed Series
It's directly installed on foundation.
b. SDY-Portable Series
It's equipped with type for moving and slope adjusting capability,
It can be Easily, freely moved and adjusted by different transfer
requirements.
3. Divided by Structures:
The belt conveyors produced by SJLC have three different structures.
a. U-steel
b. Frame
c. Truss
NOTE:
There are two kinds of conveyors, one equipped with repairing walkway
while the other without. When ordering the machine, the customers
should give us clear instruction.
Technical Data:
| Belt Width(mm) |
Belt Length (m) /Power (Kw) |
Belt Speed(m/S) |
Capacity(t/h) |
400 |
⇿2/1.5 |
12- 20/2.2 |
20 - 25/3.5 |
0.8-2.0 |
40 - 80 |
500 |
⇿2/3 |
12 - 20/4 - |
20- 30/ 5.5 |
0.8-2.0 |
40- 80 |
650 |
⇿2/4 |
12 - 20/5.5 |
20 - 30/7.5 |
0.8-2.0 |
131- 323 |
800 |
⇿/4 |
6 - 15/5.5 |
15 -25/7.5 |
1.0-2.0 |
278 - 546 |
1000 |
⇿0/5 |
10- 20/7.5 - |
20 ↿5/11 |
1.0-2.0 |
435 - 853 |
1200 |
⇿0/7.5 |
10 - 20/11 |
20-↿5/15 |
1.0-2.0 |
655 - 1284 |
NOTE:
1. The capacity in this table is the transferred quantity calculated
under the following conditions: the density of the transferred material
is 1.0t/ m3.6t/ m3, the transferring angle is ⇿8°, and stacking
angle of the transferred material is 30°.
2. The belt conveyor is used to transfer the material the density
of which is less than 2.5t/ m3.
3 .The length of the belt conveyor is limitless. We can design and
manufacture it according to customers' special requests.
|
